Filter
Top Products
74
ZONE 2/ZONE 3 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
4 You can control the unit from Zone 2 or Zone
3 by using the input selector, STANDBY,
SYSTEM POWER, MUTE and VOLUME +/–
buttons.
* VOLUME +/– can be used only when VAR. is selected in
ZONE2 SET/ZONE3 SET OUTPUT VOL (page 57).
5 Press SOURCE SELECT k/n to exit from the
Zone 2/Zone 3 mode.
• The source in Zone 2 and the source available for recording are
always the same.
• “Zone2” or “Zone3” will appear in the display window only
when k is pressed, and SYSTEM only when n is pressed
■ Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When System mode is selected, or when YPC is
selected as the amplifier library (L:AMP) code, you
can turn on/standby the main unit, Zone 2 and Zone 3
to on/standby all together simultaneously.
*
“MAIN” appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
■ Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For LDs or DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
• for LDs: Set your LD player’s left and right outputs to
the analog soundtrack.
• for DVDs: Use the disc menu to set the DVD player’s
mixed 2-channel left and right audio outputs to the
PCM or Dolby Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
Notes
*
TRANSMIT
RE-NAME
STANDBY
INPUT INPUT
SOUND
SYSTEM
CLEAR LEARN MACRO
OFF ON
MACRO
PHONO
MULTI CH IN
CD
DVD
DVR/VCR2
VCR 1
TITLE
MENU
CHAPTER
PAUSESTOPPOWER
REC
STEREO
DSP
10KEY
HALL
CHURCH
JAZZ
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
–+
ENTER
DTV
CBL/SAT
CD-R
MD/TAPE
TUNER
V-AU X
POWER
TV
POWER
STEREO
EX/ES
DSP
10KEY
ROCK
MOVIE THX
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
EFFECT
TV MUTE
MUSIC
TV THTR
ENTERTAIN
HALL
CHURCH
JAZZ
NIGHT
/DTS
CHP/INDEX
A/B/C/D/E
1
5
9
6
10 +10 +100
78
234
LCD display SYSTEM POWER/
STANDBY
Normal mode*
name of component turns the main unit
on/standby
Zone 2 mode
“Zone2” or “2:name of
component”
turns Zone 2 to on/
standby
Zone 3 mode
“Zone3” or “3:name of
component”
turns Zone 3 to on/
standby
System mode
“SYSTM” turns everything (the
main unit, Zone 2,
Zone 3) on/standby
00_RX-V2400U_EN.book Page 74 Friday, October 10, 2003 10:54 AM