Filter
Top Products
48
SET MENU
Option menu
Use to adjust the optional system settings.
Use the remote control to access and adjust each
parameter.
1 Set PARAMETER/SET MENU to
SET MENU.
2 Press k/n to select AUTO SETUP
or MANUAL SETUP, then press –/+ to enter
the selected category.
If k is pressed when AUTO SETUP is selected, or if n is
pressed when MANUAL SETUP is selected, SET MENU
will be closed. Press k/n to open SET MENU again.
3 Press k/n repeatedly to select a menu,
then press –/+ to enter the menu item.
Repeat this operation to navigate to and enter the
setup mode of the item you want to adjust.
4 Press –/+ repeatedly to change the setting of
the item you want to adjust.
5 To exit, press k/n repeatedly until the menu
disappears or just press one of the sound
field program group buttons.
Item Features Page
DISPLAY SET
Adjusts the OSD and converts video signals.
56
MEMORY GUARD
Locks sound field program parameters and other SET MENU settings.
56
PARAM. INI
Initializes the parameters of a group of sound field programs.
57
SP IMP. SET
Selects the impedance of your speakers.
57
ZONE SET
Specifies the location of the speakers connected to the SPEAKERS B terminals.
57
ZONE2 SET
Selects the Zone 2 mode.
57
ZONE3 SET
Selects the Zone 3 mode.
58
Using SET MENU
STEREO
EX/ES
DSP
10KEY
ROCK
MOVIE THX
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
MUSIC
TV THTR
ENTERTAIN
HALL
CHURCH
JAZZ
NIGHT
/DTS
CHP/INDEX
A/B/C/D/E
1
5
9
6
10 +10 +100
78
234
1
2, 3, 4, 5
2, 3, 4
5
PARAMETER
SET MENU
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
: Up/Down
p
/
p
: Select
-/+
then
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
STEREO
DSP
10KEY
ROCK
MOVIE THX
ENTERTAIN
HALL
CHURCH
JAZZ
NIGHT
/DTS
1
5
9
6
0
0
10
100
78
234
+
+
MUSIC
TV THTR
or
00_RX-V2400U_EN.book Page 48 Friday, October 10, 2003 10:54 AM