Filter
Top Products
46
ADVANCED OPERATIONS
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in “AUTO SETUP” (page 24),
“Speaker level” (page 50) and “Manually adjusting
speaker levels” (page 45). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
1 Set PARAMETER/SET MENU to PARAMETER.
2 Press TEST.
The unit will output a test tone.
3 Press k/n repeatedly to select the speaker
you want to adjust.
TEST LEFT Front left speaker
TEST CENTER Center speaker
TEST RIGHT Front right speaker
TEST R SUR. Right surround speaker
TEST R SUR. B Right surround back speaker
TEST L SUR. B Left surround back speaker
TEST L SUR. Left surround
TEST SUBWOOFER Subwoofer
4 Press –/+ to adjust speaker volumes.
5 Press TEST when you have completed your
adjustment.
The test tone stops.
y
• Use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• Before outputting the test tone, we recommend that you set the
output volume to 0 dB.
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
Using the test tone
Note
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
4
2, 5
1
3
00_RX-V2400U_EN.book Page 46 Friday, October 10, 2003 10:54 AM