Filter
Top Products
BASIC SETUP
28
The basic system parameters are set automatically when
you run auto setup (page 24). The basic settings are useful
if you want to quickly setup your speakers or to manually
adjust some of the items set in
auto setup.
y
• If you wish to configure the unit manually using more precise
adjustments, use the detailed parameters in the SOUND menu
(page 49) instead of using the BASIC menu.
• Altering any parameters in the BASIC menu will reset all
parameters in the SOUND menu.
1 Set PARAMETER/SET MENU to
SET MENU.
2 Press k/n repeatedly to select
MANUAL SETUP, then press –/+ to enter the
selected category.
If k is pressed when AUTO SETUP is selected, or if
n is pressed when MANUAL SETUP is selected,
SET MENU will be closed. Press k/n to open SET
MENU again.
3 Press n once to select BASIC MENU,
then press –/+ to enter the menu item.
4 When ROOM is selected, press –/+ to change
the setting.
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:
[U.S.A. and Canada models]
S (small) 16 x 13ft, 200ft
2
(4.8 x 4.0m, 20m
2
)
M (medium) 20 x 16ft, 300ft
2
(6.3 x 5.0m, 30m
2
)
L (large) 26 x 19ft, 450ft
2
(7.9 x 5.8m, 45m
2
)
[Other models]
S (small) 3.6 x 2.8m, 10m
2
M (medium) 4.8 x 4.0m, 20m
2
L (large) 6.3 x 5.0m, 30m
2
5 Press n to select SWFR, then press –/+ to
select:
YES
If you have a subwoofer in your system.
NONE If you do not have a subwoofer in your system.
6 Press n to select PRESENCE, then press –/+
to select:
YES
If you have presence speakers in your system.
NONE If you do not have presence speakers in your
system.
BASIC SETUP
Using BASIC setup
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
1
2~9
PARAMETER
SET MENU
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
: Up/Down
p
/
p
: Select
-/+
then
1
BASIC MENU 1/2
.ROOM:[SML
SWFR:[YESNONE
PRESENCE;;;;NONE
SPEAKERS;;;;7spk
00_RX-V2400U_EN.book Page 28 Friday, October 10, 2003 10:54 AM