E-26
PLAYBACK CONTROL OF VIDEO-CD (Ver. 2.0)
Basic operation
Use the remote control transmitter for making Playback
Control operations.
Note
Disc playback in the Playback Control mode depends on the
data of the disc used. So, according to the contents of disc,
the following operating method may not be applied to the
disc.
Be sure to refer to the instruction manual for the disc.
1 Stop this unit and select a Video-CD (version 2.0) by
pressing the DISC SKIP button on the remote control
transmitter.
* “PBC” lights up on the display.
2 Press the SELECT button. A screen menu appears on the
TV monitor.
* Some discs show several short movies sequentially
instead of a menu.
3 Select the number of item you want to play back by using
the track number input buttons.
* If the disc shows several short movies sequentially,
press the SELECT button when a desired picture
appears.
4 Playback starts, or another menu appears. If another
menu appears, repeat step 3.
(Some discs have more than one screen menu.)
5 If “NEXT” or “ ” appears on the screen during
playback, pressing the NEXT button will change to the
next menu.
If “PREV” or “ ” appears on the screen during
playback, pressing the PREV button will restore the
previous menu.
Note
In the Playback Control mode, the TIME, REPEAT, PROG
and RANDOM buttons are disabled.
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B
TAPE
C
EDIT
D
+I0
E
OPEN/CLOSE
INDEXMODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
TAPE
RETURN
STOP PLAYPLAY
REC/PAUSE TAPE 1/2
MUSIC
TEST FLAT
CENTER/REAR
/DELAY
PROGRAM
USER
POWER
INPUTSLEEP
VOLUME
REPEAT
PREV NEXT
SELECT
ECHO/KEY
LEVEL
5
1
3
2, 3