Yamaha MDX-9 CD Player User Manual


 
12
To check the programmed data
1 Stop or pause program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
To delete a specific step
1 Stop program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
3 Press DELETE (or DELETE/CANCEL on the front
panel) to delete the step. The higher steps are
renumbered automatically.
To change a step
1 Stop program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
3 Use the numeric buttons to program a new track
number for that step. The original track is cleared from
memory and the new track is programmed.
To cancel
Press PROG To turn off the “PROGRAM” indicator, eject
the disc, or set POWER to off.
Notes
If the total time exceeds 255 minutes “255mOver” is displayed
instead of the total time.
SKIP $ or can be used during playback to skip
between programed tracks.
SEARCH can be used during playback to search through
all tracks in the current program.
SEARCH ! can be used during playback return to the
beginning of the current track.