Filter
Top Products
12
To check the programmed data
1 Stop or pause program playback.
2 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
To delete a specific step
1 Stop program playback.
2 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
3 Press DELETE (or DELETE/CANCEL on the front
panel) to delete the step. The higher steps are
renumbered automatically.
To change a step
1 Stop program playback.
2 Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
3 Use the numeric buttons to program a new track
number for that step. The original track is cleared from
memory and the new track is programmed.
To cancel
Press PROG to turn off the PROGRAM indicator, eject the
disc, or press POWER to turn this unit off.
Notes
• If the total time exceeds 255 minutes “255mOver” is displayed
instead of the total time.
• SKIP $ or › can be used during playback to skip
between programmed tracks.
• SEARCH ⁄ can be used during playback to search through
all tracks in the current program.
• SEARCH ! can be used during playback to return to the
beginning of the current track.
To use headphones for private listening
Set the PHONES LEVEL knob on the front panel to “0”
(minimum) and insert the headphones plug of your stereo
headphones into the PHONES jack.
To adjust the volume level of the headphones
Use the PHONES LEVEL knob.
Turn toward “10” (maximum) to increase the volume.
Turn toward “0” (minimum) to decrease the volume.