Yamaha HTR-5440RDS Stereo Receiver User Manual


 
27
English
BASIC OPERATION
ADVANCED OPERA
TION
APPENDIX
INTRODUCTION
PREPARATION
TUNING
Automatic Tuning
Automatic tuning is effective when station signals are
strong and there is no interference.
1 Use INPUT l / h to select
TUNER as the input
source.
2 Press FM/AM to select the reception band (FM
or AM).
FM or AM appears on the display.
3 Press TUNING MODE (AUTO/MANL MONO) so
that the AUTO indicator lights up on the
display.
If z appears on the display next to the band
indication, press PRESET/TUNING (EDIT) to turn it
off.
4 Press PRESET/TUNING l once to tune in to a
lower frequency and h once to tune in to a
higher frequency.
Press the button again if the tuning search does not stop
at the desired station.
y
Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak).
When tuned in to a station, the TUNED indicator lights up and
the frequency of the received station is shown on the display. If an
RDS station that offers the PS data service is being received, the
station name is shown instead of the frequency on the display.
SILENT
PHONES VIDEO L AUDIO R
6CH INPUTINPUT MODE
INPUT
VOLUME
RDS MODE/FREQ
EON
PTY SEEK
MODE START
TUNING
MODE
PRESET
/TUNING
FM/AM
MEMORY
EDIT
BASS BALANCE SPEAKERS
PROGRAM
PRESET/TUNINGEFFECT A/B/C/D/E
AB
OFF
ON
STANDBY
/ON
DIGITAL
+
LR
TREBLE
+
MAN'L/AUTO FMAUTO/MAN'L MONO
SURROUND
DIGITAL
VIDEO AUX
3
2
1
4
INPUT
PRESET/TUNING
PRESET/TUNING
INPUT
TUNING
MODE
AUTO/MAN'L MONO
TUNING
MODE
AUTO/MAN'L MONO
PRESET
/TUNING
EDIT
PRESET
/TUNING
EDIT
FM/AM
FM/AM
Manual Tuning
If the signal from the station you want to select is weak, you
must tune in to it manually.
1 Use INPUT l / h to select
TUNER as input source.
2 Press FM/AM to select the reception band (FM
or AM).
FM or AM appears on the display.
3 Press TUNING MODE (AUTO/MANL MONO) so
that the AUTO indicator goes off.
If z appears on the display next to the band
indication, press PRESET/TUNING (EDIT) to turn it
off.
4 Press PRESET/TUNING l or h to tune in to
the desired station.
To continue the tuning search, hold down the button.
Note
If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality.
or
Lights up
Turn z off
or
Goes off
Turn z off
0105V420RDS26-30_EN 2/12/1, 1:35 PM27