Filter
Top Products
18
Playing back a tape
100 350 1K 3.5K 10K
PROGRAMMUSIC
KARAOKE
VOLUME
REC
TAPE
TAPE
NR
AB
EDIT
1
2
34
5
8
7
6
9
● Do not use C-120 tapes or poor-quality tapes, since they
can cause malfunctions.
● Before loading a tape on the tray, tighten the tape slack
with a pen or pencil.
● Tapes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the tab
on the top left protects the side facing you from erasure.
Cover the tab holes with adhesive tape to erase or record
again.
● The tape deck features an automatic tape selector. Just
load the tape, and the tape formula being used will be
sensed automatically.
● The tape deck can play back metal tapes as well as normal
or chrome tapes, however recording cannot be done on
metal tapes with good sound quality.
Dolby B Type Noise Reduction
Dolby noise reduction is an extremely effective method of
reducing undesirable background hiss on tapes. The built-in
tape deck incorporates Dolby B type noise reduction system.
DOLBY NR is useful to both recording and playback; be sure
that the same noise reduction is used on recording and
playback.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
are trademarks
of Dolby Laboratories Licensing Corporation.
General information
About the tape counter
The tape deck is equipped with a tape counter that is useful
for searching and locating a desired point on the tape. The
tape counter is shown on the display.
Pressing
(stop) when the deck is stopped will reset the tape
counter to “0000”.
100 350 1K 3.5K 10K
PROGRAMMUSIC
PRO LOGIC
HALL
3 STEREO YMERSION
EDIT
PROG
S F REP
VOLUME
AB
RANDOM
TUNER
CD
MD
TAPE
Display information
1 Tape counter
2 NR (DOLBY NR)
3 Tape direction indicator
4 Reverse mode indicator
5 TAPE (input source indicator)
6 TAPE REC
7 (play)
8 EDIT
9 Tape side indicator
Each indicator mentioned with a number on pages 19–25 corresponds to the indicator with the same number on this page.