Filter
Top Products
E-41
English
Timer recording
1 Follow steps 2–3 of “Basic recording” on page 28.
2 Tune in to the station you want to record.
3 Follow step 1 of “Timer play” on page 40.
* In step 2, select “TUNER”, and then press REC/PAUSE.
(“REC >TAPE” and the frequency will flash alternately on the
display.)
* In step 3, set the time when you want to begin recording.
* In step 4, set the time when you want to finish recording.
4 Press TIMER.
This system will be set to the standby mode.
* The STANDBY and TIMER indicators light up.
To cancel the setting of timer recording
Press DISPLAY once or more so that “REC >TAPE” flashes on
the display. While “REC >TAPE” is flashing, press REC/
PAUSE.
Note
When the timer recording is finished, the timer setting is automatically
canceled.
Using the built-in timer
Sleep timer operation
This system will automatically be set to the standby mode when the
selected sleep time passes.
11 Play the desired sound source.
22 Press SLEEP repeatedly until the desired sleep time appears on
the display. The display will change as described below.
* The normal display mode will resume about 4 seconds after
the selection is made.
* “SLEEP” will light up on the display.
2h00m
1h30m 1h00m 0h30m
OFF SLEEP
(Sleep timer is off.)
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
DIGITAL VIDEO
VIDEO CD
Version 2.0
/
Playback Control
3–DISC VCD CHANGER
STANDBY
/
ON
STANDBY
TIMER
PROGRAM B.BOOST MUSIC
INPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
PHONES
BASS TREBLE
MODE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
LEVEL
REC
/
PAUSE
TEST
—
PROGRAM
CENTER
/
REAR
/
DELAY
KEY
/
ECHO
MUSIC
SLEEP
INPUT
TAPE
VOLUME
REC/PAUSE TIMER DISPLAY
REC/PAUSE
SLEEP