Filter
Top Products
E-14
CD/Video CD player operation
To change the disc play mode
If necessary, change the disc play mode by pressing MODE on the
remote control.
All disc play mode: All discs on the disc tray are played
sequentially (originally set to this
mode).
Single disc play mode: Only the designated disc is played.
Lights up only when the all disc play
mode is selected.
To select another disc
Press DISC SKIP on the remote control once or more (so that the
corresponding disc number comes to the top position of the disc
indicator (3)).
Pressing DISC (1, 2 or 3) will select the disc directly, and play
will automatically begin from track 1.
To directly select the desired track
By using the numeric buttons on the remote control, any track you
wish to listen to can be played directly.
Use the numeric buttons to select the desired track. Play will begin
automatically.
A. For example, to choose track 5
Press 5.
B. For example, to choose track 12
(1)Press +10.
(2)Within a few seconds, press 2.
C. For example, to choose track 20
(1)Press +10.
(2)Within a few seconds, press +10 again.
(3)Within a few seconds, press 0.
Note
If you select a track number higher than the number of tracks on the disc,
the last track of the disc may be played.
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
TUNER
+
I0
PRESET
TIME
A
PROG
B
R.TIME
C
EDIT
D
DISC SKIP
MODE
RETURN
SELECT
E
VCD
/
CD
/
DISC (1, 2, 3)
MODE
DISC SKIP
Numeric buttons
DISC3
OPEN
/
CLOSE
DISC CHANGE
DISC2DISC1
DIGITAL VIDEO
VIDEO CD
Version 2.0
/
Playback Control
PROGRAM B.BOOST MUSIC
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
/
VOLUME
UP
DOWN
O
DE DOLBY NR
REC
/
PAUSE
AUTO
/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME DISPLAY
MIN
To finish using this system
Turn this system into the standby mode by pressing STANDBY/ON (or POWER on the remote control). The
STANDBY indicator will light up and the display will go out.
Direct operation
DISC (1, 2 or 3) on the front panel and / on the remote control will work if they are pressed when this system is in the
standby mode or another input source is selected.