Setup Flowchart
This flowchart shows the procedure for setting up the CRW8824S drive. For easy
cross-referencing, the relevant pages in this manual are also given.
STEP
1
STEP
1-1
STEP
1-2
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
YES
NO
Do you have a SCSI adapter
card?
Check that the SCSI adapter
card is recognized correctly
Set up the CRW8824S drive
Install the CD writing software
Check that the CRW8824S
drive is recognized correctly
Obtain a SCSI adapter card
Install the SCSI adapter card
Recommended models:
Adaptec AHA-2940-series (PCI)
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter card is
recognized correctly by the computer’s OS.
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM
to check that the drive is recognized
correctly by the computer’s OS.
For details about how to install the
software, refer to the documentation
that came with it.
Start using the CRW8824S
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
1. Set the jumper switches (P.10)
2. Fit the drive into the computer
● Tower-type case (P.14)
As additional or replacement drive
● Desktop-type case (P.22)
As a replacement drive
1