Filter
Top Products
Installation
22
Replacing an Existing CD-ROM Drive with the CRW8824S
The existing CD-ROM drive in the computer is assumed to be an IDE-type.
1Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run the risk of receiving an
electric shock and/or short-circuiting and damaging components
including the CRW8824S drive.
2Remove the outer casing of the computer. If you need to remove screws in
the process, make sure you don’t lose them.
The method for removing the casing and fitting the drive in the drive bay can vary
depending on the manufacturer. Refer to the documentation that came with your
computer for further details.