Filter
Top Products
Installation
12
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
124
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
124
Termination ON (Default) Termination OFF
Set to “ON” if CRW8824S drive
is last device on SCSI chain
4 Block Size
The data block size of the CRW8824S can be set to 512 bytes per sector by setting
the Block Size jumper switch to “ON.” This is necessary when installing the
CRW8824S on a UNIX-based workstation. It is not necessary for Windows 95/98/
98SE/NT4.0/2000 computers.
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
124
Block size OFF (Default)
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
124
Block size ON
Set to “ON” when installing
CRW8824S drive on UNIX
workstation
By factory default, the Block Size jumper switch is set to “OFF” and should
normally be left in this state.