Filter
Top Products
Operation
This section explains how to operate the CRW8824E drive after you have installed it.
You can load and eject a disc (as described below) only when the computer is
powered on.
Loading a Disc
12
1 Press the Eject button on the CRW8824E drive’s front panel.
2 Place the disc onto the tray with its label or printing facing upward.
3 Press the Eject button to close the tray.
When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to
green. For more details, refer to page 32.
Do not push or pull the tray using excessive force. Doing so can damage the drive
or the disc. Instead, always use the Eject button to open or close the tray.
Ejecting the Disc
12
1 Press the Eject button on the CRW8824E drive’s front panel.
2 Remove the disc from the tray.
3 Press the Eject button to close the tray.
24