Filter
Top Products
6
Chapter 2—Hookup Examples
CP2000—Owner’s Manual
Bridge Mode Hookup
In BRIDGE mode, the L and R channels are combined to form a massive 2000 watt sin-
gle-channel amplifier. The input signal is sourced from the Channel L inputs. The fol-
lowing hookup example shows how the CP2000 can be used in BRIDGE mode.
BRIDGE Notes:
• The input source must be connected to the Channel L inputs.
• The volume level is set by using the Channel L LEVEL control.
• The Channel R inputs and LEVEL control are inactive.
• The speakers must be connected to the 5-way binding posts.
• The 1/4" phone jack outputs must not be used.
1
3
2
NEUTRIK
2
3
1
221
CHANNEL R CHANNEL L
SPEAKERS
BRIDGE
CHANNEL R CHANNEL L
(BRIDGE)
STEREO
BRIDGE
PARALLEL
STEREO
BRIDGE
PARALLEL
YAMAHA
SPEAKER PROCESSING
OFF ON
(–)(+)
1
INPUT
Total impedance:
4Ω min (2000 W)
8Ω (1300 W)
Mixer
MONO OUT