Filter
Top Products
19
Specifications
Power Amplifier Section
Class-D power amplifier circuitry
Output 250 W/4Ω (When used alone)
500 W/2Ω (
Max output with external speaker connected
)
Preamplifier Section
All digital signal processing
Sound Type: 11 Presets
5-Band Semi Parametric Tone Controls (Variable Frequencies)
Parametric Equalizer (PEQ, F, G, Q)
Effect Section
Compressor RATIO, THRSLD, ATTACK, RELEASE,
C. GAIN, KNEE
Limiter ON/OFF (SPEAKER, LINE OUT)
Noise Gate N. GATE
Crossover Filter LPF/HPF, Cutoff Frequency
Speaker Simulator ON/LINE/OFF (SPEAKER, LINE OUT)
Effect Loop
Monaural Send/Return, Level Switch (-20 dB/+4 dB), Effect
Blend Control
User Memory
5 User Memory (Sound Type, Amp Settings, Compressor,
Effect Blend)
MIDI Functions
Receive Program Change, Control Change, Bulk In
Transmit Bulk Out, Merge Out
Controllers/Switches
Front Panel Control Knobs x 11, Push Switches x 7
Rear Panel Control Knob x1, Slide Switches x4
Displays
Push Switch LED x5
Sound Type LED x11
7-Segment LED x3 Digit
Input Level LED x2 (Green, Red)
Connections
INPUT: Standard Monaural Phone Jack
SPEAKER 1, 2 (EXT): Standard Monaural Phone Jack
PHONES: Standard Stereo Phone Jack
LINE OUT (UNBALANCED OUT): Standard Monaural Phone Jack
LINE OUT (BALANCED OUT): XLR Jack
FX LOOP (SEND/RETURN): Standard Monaural Phone Jack
TUNER OUT: Standard Monaural Phone Jack
MIDI IN, MIDI OUT: 5-pin DIN jack
Speaker Section
Speaker BBT500-115 : 15” Woofer x1, Tweeter x1
BBT500-110 : 10” Woofer x1, Tweeter x1
Power Handling 250 Wrms
Impedance 4 Ω
A/D Conversion
24 bit
D/A Conversion
24 bit
Sampling Frequency
48 kHz
Input Level/Impedance
INPUT: -37dBm (thru)/1 MΩ
FX LOOP RETURN: -20 dBm/220 kΩ, +4 dBm/220 kΩ
Output Level/Impedance
SPEAKER (BRIDGED OUT): 500 Wrms/2 Ω, 250 Wrms/4 Ω
LINE OUT (UNBALANCED OUT): +4 dBm/10 kΩ
LINE OUT (BALANCED OUT): +4 dBm/600 Ω
FX LOOP SEND: -20 dBm/100 kΩ, +4 dBm/100 kΩ
Power Requirements
U.S. and Canadian models : 120 V, 60 Hz
General model : 230 V, 50-60 Hz
Power Consumption
130W
Dimensions (W x H x D)
BBT500-115
490 x 630 x 328 mm (19-5/16” x 12-15/16” x 24-13/16”)
BBT500-110
432 x 480 x 301 mm (17” x 11-7/8” x 18-7/8”)
Weight
BBT500-115
U.S. and Canadian models : 23.9 kg (52 lbs. 11 oz)
General model : 24.4 kg (53 lbs. 13 oz)
BBT500-110
U.S. and Canadian models : 19.6 kg (43 lbs. 3 oz)
General model : 20.1 kg (44 lbs. 5 oz)
Accessories
Power Cable
Casters x4 (BBT500-115 only)
Owner’s Manual (this booklet)
Patch List
Clamp Filters x2 (U.S. and Canadian models only)
* Design and specifications may change without notice due to improvements.