VXI B10 Headphones User Manual


 
14
HEADSET VOLUME AND MUTE CONTROLS see Product Features page 5
Adjust Speaker Volume
To adjust the volume in your earpiece, press the increase or decrease volume button
for 1 second, then release. Repeat until volume is at desired level. You will hear a sin-
gle beep each time you press the button. You may also be able to adjust speaker vol-
ume on your other Bluetooth device (such as a cell phone). Check the product owner’s
manual for more information.
Mute The Microphone On The Headset
To mute the microphone, press and hold down the Increase Volume button for 4 sec-
onds. You will hear a beep and the microphone will mute. A beep will be heard period-
ically indicating that the microphone is in Mute Mode. This will not be heard on the
other end of the call.
Un-Mute The Microphone On The Headset
To un-mute the microphone, press and hold down the Increase Volume button for 4
seconds. You will hear a beep and the microphone will un-mute.
USING THE HEADSET WITH A BLUETOOTH CELLULAR PHONE
Make A Call / End A Call
Before you begin, make sure the headset is on (Page 11).
1. Put the headset on and position the microphone properly (page 10).
2. If the headset is in Standby Mode (see page 11), put the headset into Talk Time
mode by pressing the multifunction button on the headset for 1 second, then release.
3. Activate your phone. You may need to select the Bluetooth headset menu option
(consult your phone’s user manual). There may be a delay of a few seconds while the
headset and the handset discover each other. Dial as usual.