Pairing B150 Road Warrior with Nokia 6085: 1. Turn off the Headset: Press and hold the Multifunction button till you hear descending tone. ----- ----- 2. Set the phone up and get it ready to connect, go to the bluetooth menu Select: Menu Settings Connectivity Bluetooth Bluetooth - on My Phone's Visibility - Permanent visibility ----- ----- Then pause at Search for audio enhancements 3. Set the Headset in the sending mode: Press and hold the Multifunction button you will hear an ascending tone. continue holding it down and you will hear a low tone and high tone. look at the Multifunction button - it should be flashing red then yellow. ----- ----- 4. Pickup the phone and press the Select button (which should be paused at Search for audio enhancements the phone will search for a little bit and should find BTHS Select enter pass code 0000 (four zeros) OK Allow this device to connect automatically? Yes ----- ----- That should do it