Filter
Top Products
15
4. To end the call, press the multifunction button on the headset for 1 second. You
will hear a beep and the headset will disconnect from the call. Deactivate your cellular
phone.
Answer A Call / End A Call
Before answering, make sure the headset is on (page 11).
1. Put the headset on and position the microphone properly (page 10).
2. If the headset is in Standby Mode (see page 11), put the headset into Talk Time
mode by pressing the multifunction button on the headset for 1 second, then release.
3. Activate your phone. You may need to select the Bluetooth headset menu option
(consult your phone’s user manual).
4. To end the call, press the multifunction button on the headset for 1 second. You
will hear a beep and the headset will disconnect from the call. Deactivate your cellular
phone.
Switch From Headset To Handset While On A Call
1. If you hear the low battery warning (page 9) you will need to immediately access the
appropriate menu on your phone to end the connection to the headset and resume
the conversation on the handset. For assistance, consult your phone’s user guide.
Switch From Handset To Headset While On A Call
Before switching, make sure the headset is on (page 11).
1. Access the appropriate menu on your phone to activate the connection to the headset.
2. Firmly press the multifunction button on the headset for 1 second, then release.
3. Resume your conversation using the headset.