VXI B150-GTX Headphones User Manual


 
15
3. Activate your phone. You may need to select the Bluetooth headset menu option
(consult your phone’s user manual). There may be a delay of a few seconds while the
headset and the handset discover each other. Dial as usual.
4. To end the call, press the End/Off button on your cellular phone. To put the head-
set back into Standby Mode press the multifunction button on the headset for 1 sec-
ond. You will hear a beep and the headset will revert to Standby Mode.
Answer A Call / End A Call
Before answering, make sure the headset is on (page 11).
1. Put the headset on and position the microphone properly.
2. If the headset is in Standby Mode (see page 11), put the headset in Talk Time
mode by pressing the multifunction button on the headset for 1 second, then release.
3. Activate your phone. You may need to select the Bluetooth headset menu option
(consult your phone’s user manual). There may be a delay of a few seconds while the
headset and the handset discover each other.
4. To end the call, press the End/Off button on your cellular phone. To put the head-
set back into Standby Mode press the multifunction button on the headset for 1 sec-
ond, then release. You will hear a beep and after several seconds the headset will revert
to Standby Mode.
Switch From Headset To Handset While On A Call
If you hear the low battery warning (page 9) you will need to immediately access the
appropriate menu on your phone to end the connection to the headset and resume the
call on the handset. Press multifunction button on headset for 1 second, and release.
You will hear a beep and in 1-5 seconds the headset will revert to Standby Mode.
Switch From Handset To Headset While On A Call
Before switching, make sure the headset is on (page 11).