Filter
Top Products
12
PAIRING See page 5 for location of button controls and indicator lights.
Note: You must pair the B150 headset with your other Bluetooth device before first use.
Before Pairing: Turn The Headset Off
If the yellow light on the headset is flashing (you may need to wait 5 seconds to see
it), then you must turn the headset off before pairing, as follows:
Press and hold down the multifunction button on the headset for about 3 seconds.
You will hear 3 beeps in the headset that descend in tone (hold it up to your ear)
and the yellow light on the headset will stop flashing. The headset is now off.
Check your other Bluetooth device’s pairing instructions for information about pair-
ing preparation for those products.
Pair The B150 Headset With Another Bluetooth Device
Examples: Bluetooth cellular phone, Bluetooth computer or computer Bluetooth dongle, etc.,
See page 5 for location of button controls and indicator lights. Be sure the B150
headset is out of the charger and turned off (see “Before Pairing” above).
IMPORTANT: Consult your other Bluetooth device’s user guide (or the manufacturer)
for information about the device’s pairing procedure. VXI cannot provide technical
assistance for other manufacturer’s products.
1. Turn off all other Bluetooth devices or keep them at least 50 feet away.
2. Position the B150 headset and your other Bluetooth device no more than 3 feet apart.
3. Press and hold down the multifunction button on the headset for about 5-10 seconds.