Filter
Top Products
22
CHORUS
This models a standard rich-sounding analog chorus unit.
TAP “SPEED” Adjusts the modulation speed in a range of
0.1...10 [Hz].
EDIT1 [EDIT] “DEPTH” Adjusts the depth of modulation.
EDIT2 [TAP+EDIT] “SPEED” Lets you use the knob to make fine adjustments
in the delay time.
EDIT3 [BYPASS+EDIT]
“MIX” Adjusts the mix amount for the effect sound.
HINT: The CHORUS+DELAY combination effect does not allow you to
adjust the SPEED, DEPTH, or MIX parameters (these are set to appropri-
ate values). The COMP+CHORUS and OCTAVE+CHORUS combination
effects do not allow you to adjust the DEPTH parameter (it is set to an
appropriate value).
COMP
This models a compressor pedal that is popular for its percussive, clean sound.
EDIT1 [EDIT] “SENS” Adjusts the sensitivity. Turning the knob to-
ward the right will increase the amount of com-
pression and sustain. Turning the knob all the
way toward the left will turn off the effect.
HINT: For the COMP+CHORUS combination effect, turning the EDIT 3
knob [BYPASS+EDIT] all the way to the left will turn CHORUS off, letting
you use COMP by itself.
OCTAVE
This models a pedal that adds a sense of weight by generating an octave below
the input, and adding this lower octave to the original sound.
EDIT1 [EDIT] “MIX” Adjusts the mix amount for the octave-lower
sound.
NOTE:This type of effect is useful only for single notes. Unexpected results
may occur if you play chords.
HINT: For the OCTAVE+CHORUS combination effect, turning the EDIT 3
knob [BYPASS+EDIT] all the way to the left will turn chorus off, letting you
use OCTAVE by itself.
FLANGER
This models a truly classic analog flanger that gave birth to one of today’s great
guitarists considered by many to be “the godfather of dual-handed tapping.”
TAP “SPEED” Adjusts the modulation speed in a range of
0.1...10 [Hz].
EDIT1 [EDIT] “DEPTH” Adjusts the depth of modulation.
EDIT2 [TAP+EDIT] “SPEED” Lets you use the knob to make fine adjustments
in the speed.
EDIT3 [BYPASS+EDIT]
“RESONANCE” Adjusts the amount of resonance.