Filter
Top Products
22
Troubleshooting
Problem Possible Cause Solutions
PROBLEM
POSSIBLE CAUSE(S
)
SOLUTION(S
)
No video signal. Words don’t
appear on the TV monitor.
Be sure the television is set
to the “VIDEO” mode (see your
television’s owners manual)
.
The television may
not be
switched to the proper video
input channel.
Be sure the “VIDEO OUTPUT”
jack (See PARTS AND FUNC-
TIONS diagram)
on the rear
panel of the CDG-X3P is
connected to the “VIDEO INPUT”
section of the TV monitor.
Not all televisions/monitors have
“RCA” connector jacks
.
Unable to connect the CDG-X3P
to my television monitor
with the “RCA” cable provided.
Yo
u will need an “RF Modula-
tor”, or VCR
. (See
diagram for “CONNECTING A
TELEVISION MONITOR “. There
are three options for connectin
g
televisions without video input
jacks
.
There is a loud “s
quealing” noise
coming from speakers.
This noise is called “feedback”.
Feedback occurs for various
reasons. For example, feed-
back can occur if the micro
-
phone is held too closely to, or
pointed directly at, the speak-
ers . Feedback can also occur
if the microphone volume is
too high or there is too much
treble frequency being used
.
Turn down the microphone
volume
.
Turn down the treble control.
Hold the microphone away
from the speakers.