Filter
Top Products
12
Front panel controls and functions cont.
12. B-SCAN - Press this button to scan the song selection in reverse. This feature works the same as the “rewind” key
on a cassette deck. The difference between this feature and the “PREV” selection control button is this feature reverses
the CDG within the song selection and the “PREV” button skips back to the previous song.
13. F-SCAN - Press this button to forward scan the song selection. This feature works the same as the “fast-forward”
key on a cassette deck. The difference between this feature and the “NEXT” selection control button is this feature
advances the CDG within the song selection and the “NEXT” button skips forward to the next song.
14. STOP - This button stops the CDG from playing.
15. REMOTE SENSOR - This window allows the CDG-X3P II to communicate with the hand held remote control. Do not
block the window or the remote control will not work properly.
16. PLAY/PAUSE - Use this button to start playing the song selction and/or to pause the selection at any time during
play. Press once to play, press again to pause. If paused, press once to resume playing song selection.
17. BASS CONTROL - This controls the amount of bass tone in the music being played.
18. MUSIC VOLUME - This controls the volume of the music being played.
19. TREBLE CONTROL - This controls the amount of treble tone in the music being played.
20. MIC 1 VOLUME - This controls the volume for microphone input 1.
21. MIC 2 VOLUME - This controls the volume for microphone input 2.
22. MIC 1 - Microphone input jack.
23. KEY CONT. - This is used to connect the optional “key control” microphone. (not included)
24. MIC 2 - Microphone input jack for a 2nd microphone.
25. AUX - Auxilliary input selector button. Pressing this key will select the component that is connected to the auxilliary
input.For example, if an additional tape deck or CD player is used with the CDG-X3P II, and it is connected to the “AUX”
input jacks, this button will need to be selected before the component can be used.
26. DVD - Digital video disc input selector button. Pressing this button will select the component that is connected to the
DVD input jacks. For example, if a DVD player is used with the CDG-X3P II, and it is connected to the “DVD” input jacks,
this button will need to be selected before the component can be used.
27. LD - Laser disc input selector button. Pressing this button will select the component that is connected to the “LD”
input jacks. For example, if a DVD player is used with the CDG-X3P II, and it is properly connected to the “LD” input jacks,
this button will need to be selected before the component can be used.
28. CDG selector button - This button must be pressed when playing a CD or CDG disc in the CDG-X3P II.
NOTE: This button must be pressed if you are recording from the CGD player in the CDG-X3P II onto the cassette deck
otherwise you will not be able to hear the CDG disc that is playing.
CDG PLAYER
KEY CONTROL VOC/C VOC/PCASSETTE CDG LD DVD AUX
POWER
OPEN
CLOSE
PLA
Y
PAUS
E
DISP PREV NEXT B.SCAN
F.SCAN STOP
MIC VO
L
KEY
CON
T
BASS TREBLE
MIC 1 VOL
MIC 1 MIC 2
MIC 2 VOL
REPEAT MEMORY
b #
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Front Panel