Filter
Top Products
VPM-62289 USER MANUAL16
Step 1:
Turn your computer ON.
Step 2:
Connect the smaller/square USB connector end of the USB cable
into the USB Port on the VPM-62289 External Enclosure.
Or
Connect one end of the FireWire Cable to one of the two FireWire
ports on VPM-62289 External Enclosure.
If your computer Only has one the 4-pins FireWire connector, use
the FireWire 4-pins to 6-pins converter cable. Connect the 6-pins
connector of the Converter Cable to the FireWire Cable, then
connect the 6-pin connector to the VPM-62289 External Enclosure.
Note:
Do NOT connect the USB and FireWire Cables to the
VPM-62289 External Enclosure at the same time. The
damage will result in the VPM-62289 External
Enclosure.
Step 3:
Connect the Power Adapter Power Cord to the +5V/+12V
Power Adapter. Then, plug one end of the power cord into an
AC power outlet, and the other end to the power inlet of the
VPM-62289 External Enclosure.
2-6 Connecting the VPM-62289 to a Computer
Computer Requirements
• USB and/or FireWire equipped notebook or desktop computer
• Windows 98SE/Me/2000/XP, or Mac OS 9.0 or above
Proceed with the following steps to connect the
VPM-62289 to your computer.