Filter
Top Products
VPM-62289 USER MANUAL
11
b) Slide the top cover forward until it fits tight within the front groove
guide.
c) Make sure the top and bottom groove guides are matched and
form a tight fit.
d) Replace the three screws which were removed in Step 1 from
the back of the enclosure.
Step3.
a) Replace the top cover over the drive assembly, making sure the
side groove guide of the top cover slides within the side groove
guide of the bottom cover.
Top Cover
5.25” Device
Bottom Cover
(Push forward)
Mounting Screws(x3)
(See the inside of
the assemblage)