Vincent Audio SV-234 Stereo Amplifier User Manual


 
3344
Vincent
If you don't wish to use this function or if the other components do not support it, all you have to do is
leave out these cable connections.
The SV-234 is equipped with one input connector and two output connectors for the power control. As a
result, this amplifier can supply and transmit the switching signal for other components in the system as
well as accept it from other components. Both cases are described in the following.
(1) The complete system is to be switched on/off at the SV-234 POWER button
In this situation the input in the terminal "POWER CONTROL" (15) must not be occupied and must be left
open. Two HiFi components that are able to react to the power control signal can be connected directly
to the amplifier's power control outputs. If more than two devices, which can be controlled, are to be con-
nected, then it is necessary, to make the power control connection between the preamplifier and these furt-
her devices through the outputs of the two devices which are connected directly. For that reason, every
HiFi component that accepts power control signals is also equipped with a power control output. Thus, in
theory it is possible to provide an infinite number of HiFi components with the power control signal. This
approach, to loop a signal through a chain of components, is commonly referred to as "daisy chaining".
(2) The SV-234 is intended to react to the trigger signal
If, for example, two output channels of a preamplifier are connected to the main input "LINE5", if this
HiFi component can supply a power control signal and if you want the amplifier SV-234 to switch on/off
synchronously with the component attached to "LINE5", one power control output of this component
must be connected to the input in the SV-234 terminal "POWER CONTROL" (15). The connector at the
sourcing HiFi component may as well be labelled with "TRIGGER OUTPUT". Both power control outputs
of the SV-234 can additionally be used to forward the received switching signal to other components of
your system.
SV-234
e.g. main amplifier
SV-234
e.g. AV preamplifier