Filter
Top Products
5. Put the attached bases on the spacer bars, so that now all holes (two in each
speaker, two in each spacer bar and two in each base) match.
ATTENTION:
The Vienna Acoustics logo on the base faces the front.
6. Now attach the stand by completely tightening the two supplied bolts using the
hexagonal tool (Allen wrench/key).
ACCESSORIES FOR WEBERN & BERG FREE STANDING BRACKET:
BRACKET: 1 pc.
SPACER BAR: 1 pc., for connection between the speaker and the bracket.
BOLTS: 2 pcs. M6 x 45 mm
HEXAGONAL TOOL (Allen wrench/key): 1 pc.
for adjusting the bolts.
BANANA PLUGS: 2 pcs., silver plated, short version for convenient connection of
speaker cables.
GLOVES: 2 pcs.
for protecting the speaker against fingerprints.