Filter
Top Products
MOUNTING WEBERN & BERG
A. On wall application:
To prepare the speakers for wall mounting:
1. Please put on the enclosed gloves to avoid fingerprints.
2. Remove the aluminium inlays on the top and bottom of the speakers. As they are
attached with magnets, they simply lift off.
3. Put the matching wall-mounting inlay on each speaker, so that the two holes for the
two bolt sockets line up.
ATTENTION:
The two inlays are slightly different for use on each of the respective sides. In order to
mount the inlays correctly the three conical milled points must be visible and the
mounting bolts are able to be inserted.
4. Now attach the appropriate inlay with the two bolts, by using the hexagon-tool
(Allen wrench/ key).
5. Now turn the speaker over and execute the same procedure.