Filter
Top Products
To attach the wall-mounting device to the wall:
ATTENTION:
For best performance, it is recommended that the speakers be angled toward the
listening position. This means that special attention must be paid when mounting the
brackets.
If you have chosen to mount a pair of speakers with the tweeters on the inside, mount
the bracket with the thin flat profile to the inside. If mounting a pair of speakers with
the tweeters on the outside, mount the bracket with the thin flat profile to the outside.
If you have chosen to use a speaker as a center channel, two position options are
allowed, either angled up or down. To angle up, the thin flat profile of the bracket
should face up. To angle down, the thin flat profile of the bracket should face down.
1. First mark the position on the wall using the holes of the wall-mounting bracket as a
guide.
2. After drilling the holes, put the included anchors (metal for sheetrock or other wall
board, or plastic for plaster or concrete wall construction material) into the wall.
3. Now fix the wall-mounting bracket to the wall, by using the provided screws.