Filter
Top Products
user manual
MILAN Mi0
MILAN Mi0 user manual
Page 5
Safety considerations
Before using your Milan loudspeaker please read the following information as it pertains to your
safety and the reliability of your product.
Read and retain these instructions.
Heed all warnings.
Follow all instructions.
Do not use this product near water.
Do not install near any heat sources such as radiators, stoves, boilers, or other apparatus
that produces heat.
Do not allow the mains cable to become damaged, twisted, cut or caught under other
equipment.
Do not use the loudspeaker with AC mains supplies lower than 100v or higher than 240v,
as damage may result.
Use only accessories and attachments approved by the manufacturer. If the product is to
be permanently installed use only rigging hardware approved by Turbosound.
Unplug the loudspeaker during lightning storms or when it is not to be used for long
periods of time.
This equipment must be grounded (earthed).
Be careful when lifting the loudspeaker, for instance when placing onto speaker stands or
poles. Make sure that you are lifting within your personal capability.
Keep the exterior of the loudspeaker enclosure clean, and clean only with a dry cloth.
Do not install the loudspeaker in outdoor environments where the product could be
subjected to moisture, excessive temperatures or prolonged UV light exposure.
Electrically powered devices such as this product can present dangerous shock hazards
when wet or exposed to moisture.
This product is not suitable for fixed installation in outdoor environments.