Filter
Top Products
user manual
MILAN Mi0
MILAN Mi0 user manual
Page 14
5. Line Level Input
Combination jack/XLR connector that will accept a wide range of balanced and unbalanced line
level sources such as keyboards, acoustic guitars with on-board electronics and other line level
sources such as CD players and DJ mixers.
6. Mix Out
An unbalanced line level output on a male XLR that connects to additional powered Milan
loudspeakers. This output contains a mix of all connected sources and is post-EQ. Note that
adjusting the equalisation will similarly affect any additional Milan loudspeakers connected from
this output.
7. Line Level Control
Rotary level control which attenuates the input signal level of the connected instrument / line
source.
8. Treble Control and 9. Bass control
The bass control provides 6dB of boost or cut at 90H with a shelving curve shape, and the treble
control provides 6dB of boost or cut at 8kHz with a shelving curve shape. Always use equalisation
sparingly, aiming to cut rather than boost especially when the loudspeaker is used near
boundaries such as walls or floors.
10. Mic Gain Control
Rotary level control which attenuates the input signal level of the connected microphone. Allows
the mic signal to be optimised for the first and subsequent loudspeakers connected to the MIX
OUT connector.
11. Limit Indicator
Illuminates green to indicate the presence of signal at the amplifier input. Illuminates red when the
amplifier’s output is limited. Frequent and/or continuous lighting of the limit LED indicates
overdriving. If this occurs reduce the input level to the loudspeaker or enlarge your system with
additional loudspeakers.
12. Power Indicator
Illuminates green to indicate that mains power is connected and powered up.