Filter
Top Products
user manual
MILAN Mi0
MILAN Mi0 user manual
Page 20
Installing the Milan loudspeaker
Using the M10 rigging points
The Milan loudspeaker can be permanently installed in a venue, suspended
from eyebolts fitted to the internal M10 rigging points on the top and bottom
of the cabinet. Three possible orientations are available: vertically upright, or
upside down to position the high frequency driver closer to the audience, or
sideways if required.
Insert M10 load-rated shoulder eyebolts into the
threaded rigging points and tighten. The front
rigging points should take the majority of the load
while the rear rigging point should be used for
angling the cabinet downwards only.
When installing the
cabinet sideways, pick
up from either of the
two front eyebolt
pairs, and bridle the
two rear eyebolt points to provide a single pull-
back for adjusting the downward angle.
Wall Mounting
The Milan loudspeaker can be conveniently wall mounted using the PB-55 pole mount wall
bracket, which simply locates into the pole mount socket in the bottom of the cabinet.
Mount the bracket to the wall using suitable fixings, and locate the loudspeaker onto the pole
mount bracket. Rotate and angle the loudspeaker to optimise coverage and tighten the locking
mechanism to stop the loudspeaker from being inadvertently removed.