Filter
Top Products
10
B. Anti-Shock CD/CMP Player (see page 6)
1. Push the powerswitch (B2) Pg. 6 to turn on the player. Put a CD in the CD slot
(B10) or push the Stop/Eject button (B5) to take a CD out of the slot.
2. Press the Play/Pause button (B8) to start or pause CD/MP3 play .Turn the
volume control (B9) to adjust to the proper volume. Push the Stop/Eject button
to stop or change the CD or CMP (Compressed Media Player) disc.
3. Press the Forward (B7) or Reverse (B6) button to skip forward to the next track
or reverse to the previous track. Holding down the Forward or Reverse button
will continuously forward or reverse the tracks.
4. Repeat/Shuffle (B4) has three modes:
1. Repeat one song
2. Repeat all songs
3. Shuffle for random play.
5. Create Program Playlist:
Step 1: Press Prog button (B1) to begin setting up the program playlist
Step 2: Select a song (see step 3 and 6)
Step 3: Press Repeat (B4) to enter the song. Repeat steps 2 and 3 to enter
additional songs.
Step 4: Press Play (B4) to play the programmed songs in memory
*Please note that the program will reset once the Program button is pressed
again.
6. To select a folder from an CMP, press Folder button (B11). Use Forward or
Reverse buttons to select a song.
C. Tone Controls (Mixer) (see the page 7)
1. Turn the Treble control (D2) Pg. 7 counterclockwise to decrease the treble,
and turn clockwise to increase the treble. The center position (straight up)
produces a flat response.
2. Turn the Bass control (D3) counterclockwise to decrease the bass, and
turn clockwise to increase the bass. The center position (straight up) produces
a flat response.