Toshiba RD-X2U Speaker System User Manual


 
16
Index to Parts and Controls (Continued)
Introduction
Display
1 Picture quality mode indicator (HDD) (page
128)
The current picture quality mode lights up.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)
2 L-PCM indicator (Linear PCM)
(page 128)
Illuminates when playing back contents recorded
on the HDD or DVD-RAM disc, and the selected
audio mode is linear PCM.
3 Audio format indicator
(page 128)
The audio format (Dolby Digital 1,2) selected
illuminates when playing back the HDD or DVD-
RAM disc.
4 Remain icon
(page 65)
Illuminates during remain mode.
5 Picture quality mode (DVD-RAM)
(page 128)
The current picture quality mode is illuminated.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)
6 Angle icon
(page 53)
Illuminates when playing a scene recorded with
multi angles.
7 Multi display
(page 74)
Title (chapter or track) number, message, channel,
output, or audio/bilingual sound mode appear.
8 Analog output level indicator
Displays the analog output level.
L+R: Stereo and bilingual (left (main) channel and
right (sub) channel)
L: Left (main) channel
R: Right (sub) channel
Off: Mono
Level indicator may not show exact sound level. It
only shows the average level.
9 Time indicator
Displays current time, playing time, remaining
time, starting time of recording and so on.
! DVD bit rate value indicator
(page 128)
Displays the bit rate value during recording. During
playback, it shows the actual bit rate value.
LPressing the DIMMER button on the remote control
changes the brightness of the display (normal/dimmed/
off).
1 5 6 73 42
9 8
10111217 16 15 14 1318
*RD-X2.Ope(US)p010-017 9/3/02, 11:23 AM16