Filter
Top Products
8 Topcom Butler 300 Dect Headset
Topcom Butler 300 Dect Headset
8. ANSWERING CALLS
When the headset rings you will hear a ring tone trough the speaker (3). The
GREEN indication LED will blink fast. Press the headset button (2) once.
You can adjust the volume by pressing the headset button up or down.
To end the call, press the headset button (2) again.
9. USING THE HEADSET ON YOUR DECT
TELEPHONE
When registering your Butler 300 on your DECT telephone ,the headset will get an
internal number like any other DECT handset. If you have only 1 handset in use on
your DECT, it will be internal number ‘ 2’. If you have more then 1 DECT handset
on your base, it will be the next free internal number. Test this by making an internal
call from a DECT handset to the Butler 300 headset. (check your user guide of the
DECT telephone : ‘Making an internal call’)
To transfer a call from your dect telephone to the Butler 300 headset follow the
instructions in the user guide of the DECT telephone ‘ Transfering a call to another
handset’
The ring volume of the DECT headset can not be adjusted, only the receiver volume
during a call can be adjusted.
Note : The Butler 300 headset will not ring when pressing the ‘Paging’
key on the DECT base telephone system.
B300_all Page 8 Tuesday, July 15, 2003 3:57 PM