Topcom 300 DECT Headphones User Manual


 
Topcom Butler 300 Dect Headset 5
ENGLISH
Topcom Butler 300 Dect Headset
RIGHT OR LEFT
If you want to change the Headset to your other ear, you have to change the
orientation of the ear hook.
Pull the ear hook from the headset as shown below.Turn the hook 180 degrees
Attach the ear hook by gently pressing it into place
5. LED INDICATIONS
There is one LED (8) with 2 colors, one RED and one GREEN. Depending on the
situation, this LED will indicate the headset status:
When charging:
Continue RED: The battery is charging
RED blinking: The battery is charged but there is no link with the base
GREEN blinking: The battery is charged and there is a link with the base
During Standby and turned ON:
RED blinking (slow): There is no link with the base
RED blinking (fast): Battery is low or headset is in registration mode
GREEN blinking slowly: Standby and linked with the base (normal operation)
GREEN blinking fast: During incoming call
During operation (conversation):
•Steady Green: Normal operation
•Steady RED: Battery is low and need to be charged
B300_all Page 5 Tuesday, July 15, 2003 3:57 PM