Filter
Top Products
113
Step 5. Perform the following key operations at the unit to make the unit ready for data reception from the PC.
5-1. Turn the power switch off.
5-2. Press the Input channel 8 selection key, Escape/Back key, and Power switch at the same time.
The unit is placed in standby mode for communications with the PC.
Step 6. Click the "Start" button to start the firmware
file transfer.
Note
Never shut off either power of the amplifier
or PC during transfer.
Should power fail or a communication error
occur, return to Step 5.
The window at right opens.
Step 7. Click the "Exit" button to terminate the program after download completion.
The screen returns to the initial menu screen in Step 1.
Note
After update completion, the communication speed is initialized to the default value.
Reset it as needed. (Refer to p. 111 "Setting the Communication Port and Speed.")
ON/OFF
OUTPUT SEL
ON/OFF
OUTPUT VOLUME
INPUT VOLUME
POWER
UTILITY
ESC/BACK
MEMORY
ENTER
PARAMETER
8
7
6
5
4
3
2
1
INPUT SELECT
Input channel 8 selection key Power switchEscape/Back key
6