TOA Electronics A-9120DH Stereo Amplifier User Manual


 
D-001T
Audio
2 inputs
D-001T
Audio
2 inputs
T-001T
Audio
2 outputs
51
Step 3. Insert the ZP-001T module(s) into the slots in
order without leaving slots open in between.
Note
Start the insertion from Slot No. 1 when no
D-001T module is used.
Step 4. Insert the 900 Series input modules in order
without leaving slots open in between.
Note
Use the open slots in increasing slot
number order even if the T-001T module is
mounted in an intermediate position.
Insert modules into the slots, starting in
order from Slot No. 1 when not mounting
the D-001T and ZP-001T.
Step 5. Insert the C-001T module in the open slot
with the lowest slot number.
Step 6. Attach the blank panels supplied with the unit
onto open slots.
Note
If modules are not correctly installed, an error indication is displayed on
the VFD screen when the power is turned on. In such cases, check the
above procedures again and reinsert the modules.
(Example for an error indication)
M
O
DULE SL
O
T2
E
RR
O
R
Slot 18
Slot 1234567
8
D-001T
is mounted
ZP-001T
ZP-001T
(Example when no D-001T is mounted)
Slot 145678
Slot 1234567
8
Module is mounted
T-001T
900
module
900
module
900
module
(Example when no D-001Tand ZP-001T are mounted)
(Example when the T-001T is mounted in an intermediate position)
Slot 18
Module is mounted
C-001T
Open slot
(Attach the
blank panel)
900 series
module
Audio
1 input
900 series
module
Audio
1 input
ZP-001T
Audio
1 input
900 series
module
Audio
1 input
900 series
module
Audio
1 input
900 series
module
Audio
1 input
T-001T
Audio
2 outputs
900 series
module
Audio
1 input
D-001T
Audio
2 inputs
D-001T
Audio
2 inputs
D-001T
Audio
2 inputs
T-001T
Audio
2 outputs
T-001T
Audio
2 outputs
T-001T
Audio
2 outputs
C-001T
Control
8 inputs
8 outputs
12.4. Module Installation Examples
[Example of audio 8-input/8-output and control 12-input/12-output configuration]
1
Slot No.
2345678
12345678
12345678
[Example of audio 6-input/4-output and control 4-input/4-output configuration]
Open slot
(Attach the
blank panel)
Open slot
(Attach the
blank panel)
[Example of audio 3-input/4-output and control 4-input/4-output configuration]
Open slot
(Attach the
blank panel)
Open slot
(Attach the
blank panel)
Open slot
(Attach the
blank panel)