Filter
Top Products
EN15
Memory card
Clipped edge
Card Cover
Loading A Memory Card
1
Make sure the camcorder’s power is off.
2
Open the card cover (MEMORY CARD).
3
Insert the memory card firmly clipped edge first.
•Do not touch the terminal on the reverse side of
the label.
4
Close the card cover.
To Unload A Memory Card . . .
.... in step 3 push the memory card, then the memory
card comes out of the camcorder automatically. Pull
it out and close the card cover.
NOTES:
●
Be sure to use only SD Memory Cards marked “ ”
or MultiMediaCards marked “ ”.
●
Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card,
consult its manufacturer or dealer.
●
Before using a new memory card, it is necessary to
FORMAT the card.
੬
pg. 37
ATTENTION:
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the camcorder
to become unable to recognise whether or not the
card is installed.
Label
To Protect Valuable Files (available
only for SD Memory Card) . . .
...slide the write protection tab on the side
of the memory card in the direction of
“LOCK”. This prevents the memory card
from being recorded over. To record on
this memory card, slide the tab back to
the position opposite to “LOCK” before
loading it.
Write protection
tab