Filter
Top Products
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the supply voltage range of 8 V to 18 V.
Exceeding the specified supply voltage range may cause unexpected operation and/or
irreversible damage to the EVM. If there are questions concerning the supply voltage range,
please contact a TI field representative prior to applying power to the device under test (DUT).
Applying loads outside of the specified load impedance may result in unintended operation
and/or possible permanent damage to the EVM. Please consult the EVM User’s Guide prior
to connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than
65°C. The EVM is designed to operate properly with certain components above 65°C as long
as the input and output ranges are maintained. These components include but are not limited
to linear regulators, switching transistors, pass transistors, and current sense resistors. These
types of devices can be identified using the EVM schematic located in the EVM User’s Guide.
When placing measurement probes near these devices during operation, please be aware
that these devices may be very warm to the touch.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2002, Texas Instruments Incorporated