Filter
Top Products
PHONECELL SX3e AMPS 12 USER MANUAL
Step 4. Install Your Phonecell
4a. Wall-Mount Instructions:
1) Hold the mounting bracket against
the wall and mark two holes for the
long mounting screws–see Fig. 8.
2) Remove the bracket and drill two
holes for the long mounting
screws–see Figure 9.
3) Install the long mounting screws
into the wall, leaving about
1
/8
-inch
(3 mm) gap between the screw
heads and the wall–see Fig. 10.
4) Attach the mounting bracket to the
back of the Phonecell SX3 using
the short screws provided–see
Fig. 11.
5) Align the holes on the mounting
bracket with the two wall-mounted
screws. Then, mount the Phonecell
onto the screws and slide it down-
ward until the screw heads lock into
the bracket and the unit is
secure–see Figure 12.
After you’ve selected a location and made all the necessary connections,
your Phonecell SX3 is ready for wall-mounting or desktop installation.
P
RE
-I
NSTALLATION
T
IPS
:
••
Make sure the location is dry, away from
overhead water pipes, and protected
from weather conditions.
••
The area should be free of airborne
contaminants.
••
The Phonecell should be located within
2 meters (6 feet) of an AC power outlet.
Fig. 8
Fig. 11
Fig. 9
Fig. 10
Fig. 12