Filter
Top Products
15
PROGRAM PLAY OF MP3/WMA FILES STORED ON A DISC OR USB DRIVE
STORING A MP3/WMA PROGRAM
Some MP3/WMA compliations will be arranged with all
tracks in the ‘root’ folder of the disc/drive, others will be
arranged within a set of folders (usually the music albums).
The same sequence is used for both types of track storage.
To store a MP3/WMA program:
Load the disc/drive you want to play, and wait for it to •
read.
Touch the • MEMORY/CLOCK touchpad on the front panel
or press the CLOCK ADJ./PROGRAM button on the
remote control.
The Program Entry display will appear, prompting for the rst
folder, then track number to program (P-01).
Press the • { or } button to select the track number
within this folder for the rst track you want to
program.
Touch the • MEMORY/CLOCK touchpad on the front panel
or press the CLOCK ADJ./PROGRAM button on the
remote control to store this track into the memory.
The track will be stored and the program counter will increase
to P-02.
Repeat the previous four steps to store the next and •
subsequent tracks in your program sequence.
Playing the program
When you have nished entering all tracks in your •
program, press the /,/SCAN button to start the
program playing.
Clearing a program
If the CD is playing, press the • STOP/. button to stop the
disc.
Once the disc has stopped, press the • STOP/. button
again.
The Program will clear from memory.
NOTE: Opening the disc loading door will also clear the
program.
Navigating the programmed tracks:
When the program is playing, the play and pause buttons
work as normal and you can skip between tracks in the
program by pressing the { or } buttons.
Repeat function
When a program is stored you can set Repeat 1 or Repeat •
All mode in the normal way if required.
Program
position
Folder
number
Track
number
Press the • { or } button to select the folder number
for the rst track you want to program.
NOTE: If all tracks are arranged in the ‘root’ directory of
the disc, only ‘Folder 1’ (01) will be selectable at this
stage.
Touch the • MEMORY/CLOCK touchpad on the front panel
or press the CLOCK ADJ./PROGRAM button on the
remote control to select this folder.