19
SYSTEM RESET HEADPHONES
There is a headphone output socket on the side panel of the
unit. If headphones are connected to this socket for private
listening, the speakers will cut out automatically.
DAB is a terrestrial system and frequencies in dierent areas
vary. If you move the system to another part of the country
performing a Full Scan may not be enough to re program the
radio. You may therefore need to reset the radio.
NOTE: If you reset the radio all preset station memories and
timer settings will be lost.
To reset the system:
Set the system to Standby.•
Press and • hold the STOP/MENU/INFO button on the
front panel.
After a short delay the unit will reset all settings.
When next used the system will scan the DAB band and store
all stations found.
EQUALISER
You can change the equalisation of the sound to suit your
taste.
To select an EQ response:
Press the • EQ button on the remote control repeatedly to
cycle through the EQ options shown below.
As each setting is selected, the sound EQ will change.
FLAT (NO EQ)
CLASSIC
ROCK
POP
JAZZ