Filter
Top Products
9
RQT5518
A
B
C
3
1
2
1
2
3
SA-DA10
SA-DA8
(R6, AA, UM-3)
(R6, AA, UM-3)
Remote control signal sensor
Transmission
window
About 7 meters in front of the
signal sensor. (The actual
range will depend on the
angle at which the remote
control is used.)
Before use
Concerning the remote control
Use of batteries
¡Align the poles (+ and –) properly when inserting the batteries.
Press in and down towards the minus end.
¡Do not mix old and new batteries or different types of batteries.
¡Do not recharge ordinary dry cell batteries.
¡Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
¡Remove the batteries if the unit is not to be used for a long time.
¡Do not keep together with metallic objects such as necklaces.
¡Do not use rechargeable type batteries.
¡Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
A
Battery installation
Correct method of use
Operation notes
¡Do not place obstacles between the remote control signal
sensor and remote control unit.
¡Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
¡Take care to keep the remote control signal sensor and end of
the remote control unit free from dust.
¡If the unit is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote
control a shorter distance from the unit.
To prevent damage
¡Never place heavy items on top of the unit.
¡Do not disassemble or reconstruct the unit.
¡Do not spill water or other liquids into the unit.
How to open the remote control SA-DA10 only
For your reference
This remote control can be used to operate the receiver you
purchased and some other Panasonic and Technics cassette
decks, MD decks, CD players, TVs, VCRs and DVD players,
provided they are equipped with a remote control sensor.
SA-DA10 only
It is also possible to change-over the remote control code so that
the remote control can operate TVs, VCRs and DVD players which
have not been manufactured by this company (a pages 46–47).
Note
¡For details on operating other equipment, see the instruction
manual provided with specific unit.
¡Some models cannot be operated by this remote control.
¡Actual operations depend on your equipment and software.
B
C