Teac T-H300DAB Radio User Manual


 
22
Specifications
FM Tuner
Tuning range . . . . . 87.50 108.00 MHz (50 kHz steps)
Signal-to-Noise ratio . . . . . . . . . . . . . . . . 65 dB (Mono)
60 dB (Stereo)
AM Tuner
Tuning range . . . . . . . . . . 522 1620 kHz (9 kHz steps)
Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . . . 35 dB
DAB Tuner
Tunig range . . . . . . . . . . . . Band 3, 174 MHz 240 MHz
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ohms, nominal
Max signal . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 dBm typ
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . 96 dBm typ
Adjacent Channel Rejection . . . . . . . . . . . . . . 35 dB typ
Digital output . . . . . . . . . . . . . . 24 bit/48 kHz resolution
Audio output . . . . . . . . . . . . . . . . . . . . . Stereo, 2.5 Vp-p
General
Power requirements . . . . . . . . . . . . . . . 230 V AC, 50Hz
Power consumption . . . . . . . . . . 9 W (STANDBY: 3 W)
Dimensions (W x H x D) . . . . . . . . . . 215 x 85 x 270 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 kg
Operating temperature . . . . . . . . . . . . . . . . . 0 ˚C 50 ˚C
Accessories:
AM loop antenna x 1
FM antenna x 1
DAB antenna x 1
RCA pin cable x 1
Remote control unit x 1
Batteries (AAA, R03, UM-4) x 2
Design and specifications are subject to change
without notice.
Illustrations may differ slightly from production
models.
Sleep Timer
The power can be switched off (standby mode) at the
desired time.
Press the SLEEP button in the on mode. SLEEP 90 is
shown on the display. The sleep time can be changed in
10-minute steps. Press the SLEEP button repeatedly
until the desired time appears.
SLEEP 90: The power switches off in 90 minutes.
SLEEP 80, SLEEP 70 ... SLEEP 10
(off):
Sleep timer is off.
<
You can check the remaining time by pressing the
SLEEP button once.
<
To change the preset sleep timer, press the SLEEP
button again while the remaining sleep timer is
shown. The display will show the next sleep time.
<
To deactivate the sleep timer, press the SLEEP
button repeatedly until SLEEP disappears.