Filter
Top Products
12
Using Function Control 1
SELECT/TUNING MODEFUNCTION/FM MODE
In DAB mode, use function control to set system
options. There are 6 options in the function control.
Station order
Signal error rate
Preset tune
Software version
DRC value
Manual tune
Station order
Use station order to set the order in which stations are
listed. There are four orders: Favourite, Alphanumeric,
Active and Tidy.
While listening to a DAB broadcast press the
FUNCTION/FM MODE button.
Turn the SELECT/TUNING MODE knob until “Station
order” is displayed in the second line of the display.
Press the SELECT/TUNING MODE knob.
The current option is displayed in the first line of the
display.
3
2
1
Turn the SELECT/TUNING MODE knob until the
desired option is displayed in the second line of the
display.
Press the SELECT/TUNING MODE knob.
Fav Station (Favourite station)
As you tune in stations and listen to them the unit will
memorize the top ten stations you listen to and list them
at the top of the channel list. A Favourite station in the
channel list has “” displayed after the station name
on the first line of the display.
Alphanumeric
This is the default order. Channels are listed by name
with numbers first and then alphabetically by letters in
the channel name.
Active station
This option will list active stations at the top of the
channel list and channels that are in the list but have no
service in your area to be listed last in the channel list.
Tidy station
This option will list active stations and remove any
channels that are in the list but have no service in your
area from the channel list.
-> preset
This option takes your top ten Favourite channels and
assigns them to preset numbers 1 – 10.
This option is only available after “Fav Station” option
has been turned on. See above.
5
4