Teac T-H300DAB Radio User Manual


 
17
Listening to FM/AM
Preset tuning mode
Press a preset number on the remote control unit.
To select a station with a one-digit preset number
press 0 then the number. For example, if you want to
tune in preset number 2, press 0 then 2.
Preset stations can also be selected by the
SELECT/TUNING MODE knob. Turn the SELECT/
TUNING MODE knob repeatedly until the desired
preset station is found.
FUNCTION/FM MODE Button
Pressing this button switches between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and
the STEREO appears on the display.
Mono
To compensate for weak FM stereo reception,
select this mode. Reception will now be monaural,
reducing unwanted noise.
C
SELECT/TUNING MODEBAND
Select AM or FM by pressing the BAND button.
Select the desired tuning mode by pressing the
SELECT/TUNING MODE knob.
Select the station you want to listen to. (Follow the
instructions on the right in through .)
<
STEREO is displayed when a stereo broadcast is
tuned in.
Manual tuning mode
Turn the SELECT/TUNING MODE knob repeatedly
until the station you want to listen to is found.
The frequency changes by a fixed step.
FM: 50 kHz steps / AM: 9 kHz steps
Auto tuning mode
Turn the SELECT/TUNING MODE knob slightly to begin
auto tuning.
When a station is found, the tuning process stops
automatically.
Turn the SELECT/TUNING MODE knob again to stop
the auto tuning.
B
A
CA
3
2
1
Manual tune Auto tune
Preset tune