Filter
Top Products
32 TASCAM CD-RW901
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the opera-
tion.
1. While stopped, press the ERASE/DEL key on
the front panel or the
ERASE key on the remote
control. Select the
ERASE DISC? by rotating the
MULTI JOG dial or pressing the MENU (+/-) keys
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the
MULTI JOG dial or press the ENTER key
to enter the function. The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
3. Push the
MULTI JOG dial or press the ENTER
key again to proceed the operation.
The display shows
Erase ashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been erased,
Complete ap-
pears then
Blank Disc will appear on the dis-
play.
Refreshing a disc
Refreshing the disc makes a disc usable again. This
operation destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press
the
ERASE/DEL key on the front panel or the
ERASE key on the remote control. Select the RE-
FRESH? rotating the MULTI JOG dial or pressing
the
MENU (+/-) keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the
MULTI JOG dial or press the ENTER
key on the remote control to enter the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
3. Push the
MULTI JOG dial or press the ENTER
key again to proceed the operation.
The display shows
Erase ashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
4. When the disc has been refreshed,
Complete
appears then
Blank disc will appear on the
display.
Erasing tracks
Erasing
This operation erases the specified track and all sub-
sequent tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key
cannot be used to cancel it. Please check the track
range to be deleted first.
1. While stopped, press the ERASE/DEL key on
the front panel or the
ERASE key on the remote
control. Select the
ERASE TRACK? rotating the
MULTI JOG dial or pressing the MENU (+/-) keys
on the remote control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
2. Push the
MULTI JOG dial or press the ENTER
key to enter the function.
The display shows
Erase XX-XX (the number of
the rst track and last track to be erased).
Rotate the
MULTI JOG dial or press the MENU
(+/-) key to change the track numbers you desire
to erase.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE key again.
3. Push the
MULTI JOG dial or press the ENTER
key to operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP key.
4. Push the
MULTI JOG dial or press the ENTER
key again to proceed the operation.
The display shows
Erase ashing and the remain-
ing time. The unit starts counting down from a
time shown on the display.
5. When the tracks have been erased, Complete will
appears on the display.
6 − After recording